null

TSO GRS-16 Guide Rail Square (61-130-R)

UPC:
8.59448E+11
MPN:
61-130-R
Condition:
New
Availability:
Usually Ships in 1-2 Business Days - Subject to Change
  • TSO GRS-16 Guide Rail Square (61-130-R)
  • TSO GRS-16 Guide Rail Square (61-130-R)
  • TSO GRS-16 Guide Rail Square (61-130-R)
  • TSO GRS-16 Guide Rail Square (61-130-R)
  • TSO GRS-16 Guide Rail Square (61-130-R)
  • TSO GRS-16 Guide Rail Square (61-130-R)
  • TSO GRS-16 Guide Rail Square (61-130-R)
$179.95
Frequently bought together:

Description

The Original Guide Rail Square, Refined

  • Lighter than its predecessor despite being CNC machined from 25% thicker aluminum, with a mating vertical edge that now perfectly matches the height of your guide rail extrusion for maximum support and engagement
  • Latch hook now features a resilient coating to grasp and protect the edge of your guide rail
  • Reshaped T feature lead-in makes it even easier to install onto your guide rail
  • Additional accessory mounting provisions included—see our new Angle Accessory and stay tuned for some exciting new products building off the GRS-16 platform
  • Adjustments to key tolerances to better accommodate production variances observed in guide rail manufacturing
  • Available Dual FoamPac Systainer Insert fits both the GRS-16 and GRS-16 PE in a single SYS1 T-LOC Systainer
  • Fasteners used on all TSO brand tools are now metric for worldwide availability
  • New, fully recyclable all-corrugated white packaging

Simple, Automatic Accuracy

Before the GRS-16, accessories for squaring up your track saw guide rail relied on the loose-tolerance T-slot found on just about every guide rail. To overcome this inherent inaccuracy, you had to rely on a separate reference square, plus a combination of loose parts like T-bars, hex bolts, knobs or wingnuts. No longer! The patent-pending GRS-16 is completely self-contained and self-aligning, thanks to an innovative, high strength integral draw latch mechanism. Simply slide the GRS-16 onto your guide rail, lock the draw latch, and you're done. Five seconds to square.

Accurate cuts with your track saw often require using a screw or quick clamp. For this reason, we've designed notches in both reference edges of the GRS-16 to accommodate popular clamps like the Festool Screw Clamp or Quick Clamp.

Built for a Lifetime of Service (or Longer)

The GRS-16 is precision CNC machined from a single piece of 5/8" (15 mm) thick 6061-T6 aluminum and then anodized for a non-marring, high durability finish. The high-strength draw latch is built from stainless steel—to resist rust and pitting over time—and features a resilient, grippy, non-marring coating on the latch hook. Despite its high clamping strength, a comfort coating on the latch handle makes it easy to generate the leverage necessary to engage, release or reposition the square along your length of track. The GRS-16 is made in the United States, and comes with our lifetime warranty.

So Which Tool is Right for You?

If you want the absolute smallest and lightest form factor and anticipate using the square for conventional cuts referencing the front edge of your workpiece, choose the GRS-16 (the product you see on this page). If you need the ability to reference off the front and back edge of your workpiece, select the GRS-16 PE. Can't decide? Check out the Combination Set for the best of both worlds:

  • Allows you to square both ends of longer rails for greatest accuracy
  • Keep one in the truck and one in the shop
  • Special savings when purchased together as a Combination Set
  • For full Kit with Systainer and Dual Foam Pac Insert: GRS-16-KITWSYS
View AllClose

Warranty Information

We stand by the GRS-16 with a lifetime warranty!
View AllClose
About US Tool & Fastener

US Tool & Fastener is a division of Angel-Guard Products, Inc. We pride ourselves on offering only the very best in woodworking tools and equipment. Our staff is trained to handle all requests professionally, complete, and as quickly as possible.

See Reviews Contact Us